Get to know the 100GBASE QSFP28

Description

Gigalight GQS-MP101-XXXCL is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ SR4 for 100 or 40 Gigabit Ethernet , Infiniband FDR/EDR and 32GFC Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 112.2 Gbps bandwidth. Each lane can operate at 28.05Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates Gigalight Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

---

Features (Low Power Version)

▪ Bandwidth density of 100 Gbps bi-directional
▪ Transmission data rate up to 25.8Gbps per channel
▪ 4 channels 850nm 25G VCSEL array
▪ 4 channels 25G PIN photo detector array
▪ Internal CDR circuits on both receiver and transmitter channels
▪ Hot Pluggable QSFP28 form factor
▪ Maximum link length of 70m on OM3 Multimode Fiber (MMF) and 100m on OM4 MMF
▪ Operating case temperature 0°C to +70°C
▪ 3.3V power supply voltage
▪ Low power consumption <2.5W
▪ RoHS 6 compliant(lead free)

---

Applications

▪ IEEE 802.3bm 100GBASE SR4
▪ InfiniBand EDR
▪ Datacom/Telecom switch & router connections
▪ Data Aggregation and Backplane Applications
▪ Proprietary Protocol and Density Applications