Get to know the 100GBASE QSFP28

Description

Gigalight GQS-MP101-XXXCL is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ SR4 for 100 or 40 Gigabit Ethernet , Infiniband FDR/EDR and 32GFC Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 112.2 Gbps bandwidth. Each lane can operate at 28.05Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates Gigalight Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

---

Features (Low Power Version)

▪ Bandwidth density of 100 Gbps bi-directional
▪ Transmission data rate up to 25.8Gbps per channel
▪ 4 channels 850nm 25G VCSEL array
▪ 4 channels 25G PIN photo detector array
▪ Internal CDR circuits on both receiver and transmitter channels
▪ Hot Pluggable QSFP28 form factor
▪ Maximum link length of 70m on OM3 Multimode Fiber (MMF) and 100m on OM4 MMF
▪ Operating case temperature 0°C to +70°C
▪ 3.3V power supply voltage
▪ Low power consumption <2.5W
▪ RoHS 6 compliant(lead free)

---

Applications

▪ IEEE 802.3bm 100GBASE SR4
▪ InfiniBand EDR
▪ Datacom/Telecom switch & router connections
▪ Data Aggregation and Backplane Applications
▪ Proprietary Protocol and Density Applications

40G QSFP+ to 4x 10G SFP Breakout AOC

Description

Gigalight QSFP to 4x SFP+ breakout Active Optical Cable offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers. For typical applications, users can install this splitter Active Optical cable between an available QSFP port on their 40Gbps rated switch and feed up to four upstream 10GbE-SFP+ enabled switches. Each QSFP-SFP+ splitter Active Optical cable features a single QSFP connector (SFF-8436) rated for 40Gbps on one end and (4) SFP+ connectors (SFF-8431), each rated for 10-Gb/s, on the other.

Features

Electrical interface compliant to QSFP+ connector (SFF-8436) and SFP+ connectors (SFF-8431)

Hot Pluggable

850nm VCSEL transmitter, PIN photo-detector receiver

Up to 100m on OM3 MMF

Operating case temperature: 0 to 70℃

All-metal housing for superior EMI performance

RoHS compliant (lead free)

Applications 

◇ 40 Gigabit Ethernet

◇ Fibre Channel Applications

◇ InfiniBand QDR, SDR, DDR

◇ High-performance computing clusters

◇ Servers, switches, storage and host card adapters 

Further concerns could refer to jason@gigalight.com

Get to know the DataCom 40G QSFP+ AOC

40G QSFP+ are still the mainstream optical transceivers being used in communication and networking, and playing an important role to drive the sales of 10-, 40- and 100-Gbps optical transceivers for enterprise and data center applications, even if the 100G optical module has been released and used more and more. 40G QSFP+ transceivers demand growth over SMF is primarily a result of large shipments to Internet content providers like Google, Microsoft and Baidu. So we'd like to introduce the DataCom QSFP+ active optical cables (AOC) for enterprise and data center networks.

---

Description

QSFP active optic cables has a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE-SR4. Gigalight QSFP AOC is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s.

---

Features 

▪ Full duplex 4 channel 850nm parallel active optical cable

▪ Transmission data rate up to 10.3Gbit/s per channel

▪ SFF-8436 QSFP+ compliant

▪ Hot pluggable electrical interface

▪ Differential AC-coupled high speed data interface

▪ 4 channels 850nm VCSEL array

▪ 4 channels PIN photo detector array

▪ Maximum link length of 300m on OM3 Multimode Fiber (MMF)and 400m on OM4 MMF

▪ Low power consumption <1.5W

▪ Operating case temperature 0°C to +70°C

▪ 3.3V power supply voltage

▪ RoHS 6 compliant

---

Applications

▪ Infiniband transmission at 4ch SDR, DDR and QDR

▪ 40GBASE-SR4 40G Ethernet

▪ Data Centers 

Further details could be available on jason@gigalight.com.

Data Interconnection: 40G QSFP+ to 8x LC Connector Breakout AOC

Gigalight QSFP+ to 8 x LC Connector Breakout Optical Cable are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and IEEE P802.3ba 40GBASE-SR4. Gigalight QSFP+ Breakout Cable is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s. QSFP+ Breakout Cable are suitable for short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. These breakout cables connect to a 40G QSFP+ port of a switch on one end and to four 10G SFP+ Transceivers of a switch on the other end.

Features 

Full duplex 4 channel 850nm parallel active optical cable; 

Transmission data rate up to 10.3Gbit/s per channe;l 

SFF-8436 QSFP+ compliant; 

Hot pluggable electrical interface; 

Differential AC-coupled high speed data interface;

4 channels 850nm VCSEL array;

4 channels PIN photo detector array;

Maximum link length of 300m on OM3 Multimode Fiber (MMF)and 400m on OM4 MMF;

Low power consumption;

Housing isolated from connector ground;

Operating case temperature 0°C to +70°C;

3.3V power supply voltage;

RoHS 6 compliant.

Applications 

#Infiniband transmission at 4ch SDR, DDR and QDR 

#40GBASE-SR4 40G Ethernet 

#Data Centers

Further details could be available via jason@gigalight.com.